Oregon DOT Qualified Products – January 2010 (TPD1001024)

The “QUALIFIED PRODUCTS LIST” is made up of two types of lists:

1. The QUALIFIED LIST – “Q” is for products that have been reviewed and found to be suitable for use in a specific category. Job control testing may still be necessary. Consult the ODOT Nonfield- Tested Materials Acceptance Guide“, the “ODOT Field-Tested Materials Acceptance Guide”, and the Project Specifications.
2. The APPROVED LIST – “A” is for commercially available products having a low consequence of failure. These products are only usable for appropriate applications. May Require a Field Inspection Report. State existence on the Approved List and recognition of the product. No additional sampling or testing is needed.

Products on the REJECTED LIST should not be used for that specific category. Common reasons for rejection are: inability to meet our specifications, or poor performance. It is possible that a product could be rejected for one category but qualified in another.

Specific questions regarding products on the un-published

CONDITIONAL LIST can be answered by calling 503/986-3059.

“Conditionally Approved” products need specific, prior approval for each project. Approval is given for one project at a time.

The use of all products is restricted to the category in which they are listed. Products should be used and installed as the manufacturer recommends. Use of this list by ODOT Maintenance Personnel as an information resourceis encouraged.

The “QPL” and submittal forms are accessible from the Internet: http://www.oregon.gov/ODOT/HWY/CONSTRUCTION

Although the products listed may be approved for use, they are not exempt from State Purchasing Rules, practices and guidelines, or manufacturer’s warrantees or guarantees.

If you have questions, contact:

Oregon Department of Transportation 800 Airport Rd SE, Salem, OR 97301-4798 Mike Dunning, Phone: 503/986-3059

E-Mail: mike.d.dunning@odot.state.or.us FAX: 503/986-3096

ODOT CONSTRUCTION/MATERIALS SECTION                    PAGE                                    24

QUALIFIED PRODUCTS LIST

APPROVED LIST – NO SAMPLES OR TESTS REQUIRED* QUALIFIED LIST – ADDITIONAL REQUIREMENTS**

JANUARY 2010

*LIST ‘A’ = APPROVED. MAY BE USED WITHOUT SAMPLES, TESTING, OR QUALITY COMPLIANCE CERTIFICATIONS. MAY NEED A FIELD INSPECTION REPORT.

**LIST ‘Q’ = QUALIFIED. USE WITH SAMPLING, TESTING, &/OR QUALITY COMPLIANCE CERTS AS NEEDED. NEEDS A FIELD INSPECTION REPORT. CHECK SPECS & NFTMAG. LIST PUBLISHED BY: ODOT MATERIALS LAB; 800 AIRPORT RD SE; SALEM, OR 97301-4798; (503) 986-3059. PLEASE REPORT ANY PROBLEMS USING THESE PRODUCTS.