Reference Library

Soilworks products are the industry’s top standard due to our insistence on creating high performance soil stabilization and dust control products that stand up to rigorous testing – both in the lab and in the field. Our commitment to quality and performance has led to our involvement and testing in hundreds of real-world situations. The following library of reports, presentations, specifications, approvals and other similar documents provide you, our customer, the transparency and dependable assurance that is expected from Soilworks.

SOIL-001-02-01 – Report – CalTrans 18-1.02B(5) for Solita (TPD1805021)

Subject:           Evaluate SoilWorks’ Soiltac in accordance to CalTrans 18-1.02(B): Synthetic Polymer Emulsion Requirements

Test Methods:                    Testing was completed as described in CalTrans Standard Specification 18- 1.02(B): Synthetic Polymer Emulsion Requirements. Test methods assigned for reference include ASTM D 2834 – Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes; ASTM D 1293 – Standard Test Methods for pH of Water ; ASTM D 2196 – Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer; ASTM D 412 – Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension; ASTM D 1417 – Standard Test Methods for Rubber Latices—Synthetic, Section 9 Coagulum Content; ASTM D 5040 – Standard Test Methods for Ash Content of Adhesives.

Chart Graph Placeholder

Sampling Chart

Chart Graph Placeholder

Results of Testing

Statement of Attestation:        Testing above was performed in accordance with CalTrans 18-1.02(B):

Synthetic Polymer Emulsion Requirements; equipment utilized was in accordance with ASTM D 2834 – Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes; ASTM D 1293 – Standard Test Methods for pH of Water ; ASTM D 2196 – Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer; ASTM D 412 – Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension; ASTM D 1417 – Standard Test Methods for Rubber Latices—Synthetic, Section 9 Coagulum Content; ASTM D 5040 – Standard Test Methods for Ash Content of Adhesives. The laboratory test results presented in this report are representative of the materials supplied.

Test Methods:                    Testing was completed as described in CalTrans Standard Specification 18- 1.02(B): Synthetic Polymer Emulsion Requirements. Test methods assigned for reference include ASTM D 2834 – Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes; ASTM D 1293 – Standard Test Methods for pH of Water ; ASTM D 2196 – Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer; ASTM D 412 – Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension; ASTM D 1417 – Standard Test Methods for Rubber Latices—Synthetic, Section 9 Coagulum Content; ASTM D 5040 – Standard Test Methods for Ash Content of Adhesives.

Chart Graph Placeholder

Sampling Chart

Chart Graph Placeholder

Results of Testing

Statement of Attestation:        Testing above was performed in accordance with CalTrans 18-1.02(B):

Synthetic Polymer Emulsion Requirements; equipment utilized was in accordance with ASTM D 2834 – Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes; ASTM D 1293 – Standard Test Methods for pH of Water ; ASTM D 2196 – Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer; ASTM D 412 – Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension; ASTM D 1417 – Standard Test Methods for Rubber Latices—Synthetic, Section 9 Coagulum Content; ASTM D 5040 – Standard Test Methods for Ash Content of Adhesives. The laboratory test results presented in this report are representative of the materials supplied.

Complete the form below to download this document now.

http://bit.ly/2wZyexj